Using the PRESET for Washing (continued)
Predefined operation can t be set in DELICATE , WOOL , BLANKET , TUB CLEAN , CLEAN/AIR JET Processes.
How to use the "PRESET" button (Switched options)
The preset function allows the finishing time to be set to 6 hours or 9 hours later. This feature comes in handy when you
wish to do the washing while you are out or when you wish to do the washing at night ang hang out in the morning.
Press the "PRESET" button to set the washing content.
In the following cases
Fix the preset duration: press the "PRESET"
button
.
(With the button pressing and holding, the preset
duration will be displayed)
(
Cancel the preset duration: switch off the
"POWER ON/OFF" button
Change the preset duration: switch off the
"POWER ON/OFF" button
Using the Detergent Again
Use the detergent again
1
Laundry with
Washing only
slight dirt
"Washing" only for the 1st
collective of laundries.
32
6
9
PRESET
9 hours later (Light)
6 hours later (Flash)
9
(
)
6
)
.
/
, and reset.
/
2
Put in the 2nd collective of laundries, and select
the favorite washing mode.
• Set the proper water level for the laundries.
PRESET
PRESET
No setup (Darken)
(
)
(
Attention
• In predefined operation, do not mix the clothes liable to
discoloration.
• With the power unplugged or cut, the preset process will be canceled.
• The washing time varies with the change of the load and
texture of the washings and the volume of the charged water.
• To prevent the laundry from corrugating, take it out for drying
as early as possible after the end of washing.
• Please make sure the inhaling window is closed before
operation. If the washing machine operates with the inhaling
window open, the water may splash.
3
Washing
Rinsing
Spinning
Rinse and spin the 1st collective of washed
laundries.
• Set the proper water level for the laundries.
)
Rinsing
Spinning