Using the Preset for Washing (continued)
How to use the "Preset" button (Switched options)
The preset function allows the finishing time to be set to 6 hours or 9 hours later. This feature comes in handy when you
wish to do the washing while you are out or when you wish to do the washing at night ang hang out in the morning.
6
Press the "Preset" button to set the washing content.
In the following cases
Fix the preset duration: press the "Preset" button
(With the button pressing and holding, the preset duration
will be displayed)
(
Cancel the preset duration: switch off the "Power
On/Off" button
.
Change the preset duration: switch off the
"Power On/Off" button
Using the Detergent Again
Use the detergent again
1
Laundry with
Washing only
slight dirt
"Washing" only for the 1st
collective of laundries.
9
9 hours later (Light)
6 hours later (Light)
9
(
)
.
)
/
, and reset.
/
2
Washing
Put in the 2nd collective of laundries, and se-
lect the favorite washing mode.
•
Set the proper water level for the laundries.
No setup (Darken)
(
)
Attention
•
In predefi ned operation, do not mix the clothes liable to discol-
oration.
•
With the power unplugged or cut, the preset process will be canceled.
•
The washing time varies with the change of the load and
texture of the washings and the volume of the charged water.
•
To prevent the laundry from corrugating, take it out for drying
as early as possible after the end of washing.
• Please make sure the inhaling window is closed before opera-
tion. If the washing machine operates with the inhaling window
open, the water may splash.
3
Rinsing
Spinning
Rinse and spin the 1st collective of washed
laundries.
•
Set the proper water level for the laundries.
Rinsing
Spinning
31