Hitachi AJ-S55KXP User Manual page 48

When Failure Happens (continued)
Case
Fail to supply water
No spinning, washing
basket can't rotate
No stirring
Unable to air jet
It doesn't work after setting
of air jet
Can not open the lid
Abnormal sound occurs
No buzz at the end of washing
The lid can't be opened during
the operation.
Water can not be reserved
(when pouring the water with
water basket)
• Except the failures metioned above, the lid lock protector may cause cases such as stop during operation or lid
unable to be opened. In such case, please unplug the power supply unit. Plug it back after 5 minutes, and then
reset operation.
AJ-S55KXP
• If all indicators turn off during operation but only the water drainage pump remains in operation, this is the auto
operation of protection circuit in washing machine for water level is too high.This is not an error.
After water drainage pump stops, please reconnect the power supply and reassign the setting.
48
Cause
Please refer to "Part to check" in "About abnormality alarm".
• Please refer to "Proposed Operation Time".
• If there is water remained in the spinning basket, Start button
can not be pressed. And it can only be pressed after draining
all of the water.
• Is the power on?
(If there is outage and shutdown during the operation, the
washing machine will generate alarms and cut off the power
supply. The lid is still locked. When power supply is switched
on again, the lid lock will be unlocked.)
?
• Is the washing machine declining or shaky?
Guide
?
• Is any barrette or metal item mixed in the washing basket?
• Is the buzz at the end of washing set as canceled?
• Whether it is set to lid lock function (safety protection mode)?
• Is the power on?
?
(In case of power cut during draining, the drainage valve will
keep open. And the drainage valve will close after the power
resumes.)
46
37
37
7 Installation
7
?
18
? 18
? 18
46
18