Lo / Dx Button, Radio Mode Select Button, Presetting Stations - Sanyo CDF-R800 Operating Instructions Manual

LO I DX button, Radio mode select button, Presetting stations
LO / DX button (Selecting seek sensitivity of Auto tuning)
Press the LO / DX button ( G ) for 1.5 seconds or more to select the desired seek
sensitivity.
0
With each press, [DX] indicator appears and disappears.
To receive local stations with strong signals, make the [DX] indicator disappear.
8
To receive distant stations with weaker signals, make the [DX] indicator appear.
Press the Radio mode select button ( 4 ) to switch immediately to Radio mode
from other mode (CD, Changer, Power off mode).
Presetting stations
How to preset
rized.
2. Press the desired preset button for 1.5 seconds or more.
3. To preset additional stations, repeat procedure 1 and 2.
How to recall
Select the desired band and press the desired preset button.
How to preset
1. Select the desired band (FM or AM).
2. Press the Auto travel preset button ( a ) until1 the [ - - -1 indicator appears
(for about 1.5 seconds). The indicator [ATP] will flash on and off. The unit will
scan the band for the strongest 6 stations and automatically memorize them.
Scanning will stop and the first memorized station will be heard.
N o t e s :
If all stations are weak, none may be memorized. If this should occur, [OOO]
l
appear on the display. The station received last will be selected.
If there are fewer than 6 receivable stations, the unit will memorize all the receiv-
l
able stations, then the first memorized station will be selected.
1 5
Preset buttons
. . . . . . . . . . . There are 2 types as follows.
6 stations can be preset on each band (FM1 , FM2, AM).
unit will scan the selected band (FM or AM) and
memorize the 6 strongest stations.
Radio mode select button
will