Unit Removal - Sanyo CDF-R800 Operating Instructions Manual

Installation
1. Install the supplied trim panel (Fig. 1-o) to the unit (Fig. 1-B).
2. Insert the supplied mounting bracket (Fig.l-0)
53mm in the dashboard or a console.
3. Bend the stoppers of the mounting bracket to the outside until1
ened in the cutout. (Fig.2)
4. Insert the unit into the mounting bracket until1

Unit removal

into DIN-standard Cutout 182 x
the bracket is tight-
it locks in place.
1. Insert the supplied removing levers
into the two holes provided on each
side of the trim panel.
2. Move the tips of levers upward, and
press them against the unit.
Make sure a distinctive clicking is
heard.
3. Pull the levers to remove the unit.
2 4