How To Play Cds, Pause, Selecting A Disc /Track - Sanyo CDF-R800 Operating Instructions Manual

How to play CDs, Pause, Selecting a disc / track
A compatible SANYO CD Changer must be connected.
How to play CDs
mode from other mode (Radio, CD, Power off mode ).
2. Adjust the volume and tone quality. (See page 8 "Audio control".)
When the CD Changer is used for the first time, or when the CD magazine has
l
been changed, play will begin from the first track of the first disc.
0
Pause
Press the Play / Pause button (
To resume play from the point at which play was stopped, press the button again.
Note:
If the unit is left in the Pause mode for more than 5 minutes, the power will switch
l
off automatically.
Selecting a disc
Press one of the Disc select buttons (II\, \2+\) to select a disc.
Selecting a track
Pressing the ( H ) or ( m ) side of the Track/Skip button ( .+EfKn ), select a track.
Desired Track
Next Track
Current Track
(from the beginning)
Preceding Track
1 7
Changer mode select button
Play / Pause button
Track / Skip button
) during play to stop the play temporarily.
Press this side.
I
(twice successively) 1
) to switch immediately to Changer
0
I