Advertisement
RADIO OPERATION
SELECTING RADIO BAND
Press button ~ to select the desired band while in radio mode.
~FMl
~M2
~MW
1
RADIO TUNING . . . .. ...................... .. . ....... ...............2
.
Manual tuning
. ............... . .To select higher frequency stations, press the A button (for less than
0.5 seconds)
To select lower frequency stations, press T button.
To quickly scan up or down in frequency, press and hold the A or V
button. Release and press again the button when the desired
frequency appears on the display.
A flashing decimal point in the frequency display indicates that the
system is receiving
a station 50 kHz higher than the displayed
frequency.
Automatic tuning ............ . . . Press the
A
or 7 button for more than 0.5 seconds.
When the button is released, the system
will start automatic tuning
and stop at the next receivable station.
STORING PRESET STATIONS .. . .. . .. . .. .................3
The preset buttons can be used to store 6 stations in each band (FM1, FM2, MW) for quick tuning.
.
Programming
stations . . . ....~
Select the desired band and tune in the station you want to store
in memory.
Press and hold one of the preset buttons for more than 1.5
seconds. Repeat step
and
to program further station.
Quick tuning . . . . .. . . . . . ..........Select a desired band and press one of six preset buttons
ATP (AUTO TRAVEL PRESET) . .. .. . .. . .. . .. ............. 4
whentheATPbu~on @is
pressed
for 2
seconds
or more,
ATP is displayed
and the
radio automatically
memorizes
up to 6
stations
beginning
with the one with the
strongest
signal.
When the ATP button @is pressed for less than 2 seconds, the first memorized station
is recalled. To recall the stations one after another in the order they were memorized,
repeatedly
press this button quickly.
-5-
Advertisement
