Non-Hot-Plug Pci Riser Board Slot Definitions - HP ProLiant DL380 Gen9 Maintenance And Service Manual

LED
Flashing green
Solid green
Flashing red
Solid red
For more information about the FSBBU module, see "HP 750W Flex Slot Hot Plug Battery Backup Module (on
page 40)."

Non-hot-plug PCI riser board slot definitions

•
Primary riser cage connector, connected to processor 1 or the Southbridge
1 - FL/FH
2 - HL/FH
3 - HL/FH
•
Secondary riser cage connector, connected to processor 2 (processor 2 must be installed)
4 - FL/FH
5 - HL/FH
6 - HL/FH
*The server ships with one PCIe3 riser cage installed in the primary riser cage connector.
Notes:
•
"Primary" denotes the riser cage is installed in the primary riser connector.
•
"Secondary" denotes the riser cage is installed in the secondary riser connector.
•
Installing the riser cages listed in the table above in either the primary or secondary riser connectors
determines the form factor of the PCI expansion boards supported by those riser cages.
Mode/State
Discharge mode
•
RSOC—70-100% frequency=0.5Hz; duty=0.5
•
RSOC—31-69% frequency=1Hz; duty=0.5
•
RSOC—0-30% frequency=1.5Hz; duty=0.5
•
Online mode and charger is OFF
•
Battery is fully charged
Auxiliary path A/B protection
FSBBU fault or other protections
PCIe 3-slot riser cage*
PCIe3 x16 (8,4,2,1)
PCIe3 x16 (8,4,2,1)
PCIe3 x8 (8,4,2,1)
PCIe 3-slot riser cage*
PCIe3 x16 (16,8,4,2,1)
PCIe3 x16 (16,8,4,2,1)
PCIe3 x8 (8,4,2,1)
Optional PCIe 2-slot x16 riser cage
—
PCIe3 x16 (16,8,4,2,1)
PCIe3 x8 (8,4,2,1)
Component identification 109