Tray Designation - Canon ImageRunner 2545i Reference Manual

3
3
4
Press

Tray Designation

You can designate the machine's output trays to be used for specific job types. The
output trays are indicated by Tray A and Tray B.
Options Attached
Inner Finisher-B1 and
Inner Finisher
Additional Tray-B1
Inner 2 Way Tray-G1
Each of the output trays can be designated for multiple job types. If both of the
output trays are enabled for the same job type, the prints are delivered to Tray A
until it reaches its stacking limit.
3-14
Specifying Common Settings
(Reset) to return to the top screen.
Job Types
Copy:
(See the Copying Guide.)
Media Print:
(See the Printer Guide.)
Print:
(See the Windows Printer
Driver Guide or the
Mac Printer Driver
Guide.)
Receiving (RX):
(See the Sending and
Facsimile Guide.)
Others (e.g. report printing):
(See "Printing the User's Data
List," on p. 2-39 and the
Sending and Facsimile Guide.)
Press [Low] or [High] to select
the desired setting ➞ press [OK].
[Low]:
Energy consumption level in the Sleep
mode is low, but it takes longer to wake
from the Sleep mode.
[High]:
Energy consumption level in the Sleep
mode is high, but it takes less time to wake
from the Sleep mode.
The selected mode is set.
Trays A and B
B
A
B
A