Canon ImageRunner 2545i Reference Manual page 40

Platen Glass (View from Above)
Arrow
Place the
original
face down.
Vertical Placement
Place the
original
face up.
Vertical Placement
NOTE
• If the top left corner of the original (face down) is not aligned with that of the platen
glass, the original may not be scanned correctly.
• A4 and A5 originals can be placed either vertically or horizontally. However, the
scanning speed for horizontally placed originals is somewhat slower than for vertically
placed originals. Place originals horizontally when printing with a preset copy ratio,
such as when enlarging an A4 original onto A3 paper. (See Chapter 2, "Basic Copying
Features," in the Copying Guide.)
• Horizontally placed A4 and A5 originals are referred to as A4R and A5R respectively.
• A3 originals must be placed horizontally.
• To achieve the same output orientation using the feeder as when the original is placed
on the platen glass, place the original upside down and face up. However, if an
appropriate size of paper is not loaded in the Staple mode, the output is rotated
automatically.
Arrow
Feeder (View from Above)
Place the original face down.
Horizontal Placement
Place the
original
face up.
Horizontal Placement
Placing Originals
2
2-15