Table of Contents
Advertisement
Available languages
Available languages
3.3 The functional tilt mechanism
The functional tilt mechanism
dance to the display tilt angle in either a blood pressure monitor or
a practical travelling clock. When folded the device is in travelling
mode and thus prevents an accidental activation during a trip. The
marking on the right side of the device indicates the actual function
mode:
OFF
3.4 Set date and time
•
Adjust the display tilt angle in that way, that the marking of the tilt
3
mechanism
•
Press and hold the START-button
multaneously for at least approx. 1 second. Firstly, all display ele-
ments will be shown (self-test) and then you can adjust the time
display format (12 or 24 hours display) with the MEM-button
•
Press the SNOOZE-button
the year value.
•
Follow the same steps (MEM-button
to continue with the next value) to enter the correct values
1
ton
e
for year
, month and day
s
ference
for a second time zone
•
Date and time are now displayed constantly. The time of the sec-
ond time zone
difference (<> 0) before.
•
You may leave the setting mode at any time by pressing the
START-button
button the device automatically leaves the setting mode.
•
If the batteries are removed, these values are lost and need to be
input again.
Blood pressure
measurement mode
indicates "Travelling clock mode".
1
t
p
will only be displayed, if you have entered a time
6
. After approx. 1 minute without pressing any
3 Getting started
3
transforms the device in accor-
6
and the MEM-button
to continue with the adjustment of
7
to adjust, SNOOZE-but-
f
, hour
, minute
p
.
Travelling
clock mode
7
si-
7
u
and time dif-
29
GB
.
Advertisement
Table of Contents
