Initializing The Current Settings - Yamaha YSP-800 Owner's Manual

4
Press
<J
/1>
to switch between PROTECT: ON
and PROTECT: OFF.
-+
• Select PROTECT: ON to activate the protection
feature.
• Select PROTECT: OFF to deactivate the protection
feature.
5
Press STANDBY/ON on the front panel or on
the remote control to set this unit to the
standby mode.
ADJUSTING SYSTEM PARAMETERS
Initializing th,·current settings
You can reset all of the parameters of this unit to the
factory presets. This procedure completely resets ALL the
parameters in SET MENU.
Note
After perfonning the following procedure you must reset the
ROOM TYPE, SP POSITION and ROOM SIZE parameters to
match your surround sound environment.
1
Repeat steps 1 to 3 in "Setting the maximum
volume level" on page 75.
2
Press
L::::.. / "V
on the remote control so that
FACTORY PRESET is shown in the front
panel display.
-+
Front panel
or
Remote control
3
Press ENTER.
The new setting will be activated when you tum on
the power of this unit next time.
77
I