Using Set Menu; Displaying The Osd - Yamaha YSP-800 Owner's Manual

USING SET MENU
2
Press STANDBY/ON on the front panel or on
the remote control to turn on the power of
this unit.
1
Check that the video input jack on your TV is
connected to the VIDEO OUT jack of this unit
to display the OSD of this unit.
• Other buttons that display the
aSD
Remote control buttons that
Page
display the OSD
CD
Input selector buttons 37
@ Ce)
TruBass
54
® Beam mode buttons
40
@ Sound field program buttons
49
®
CH LEVEL 79
®
VOLUME
+/-
38
(J) MUTE 39
®
INPUTMODE
81
®
SLEEP
55
@) VOL MODE
52
@
SURROUND
44
@
MENU
28,57,64
or
This section simply describes how to display the OSD (on-
screen display) of this unit on your TV screen and set the
parameters for your listening room. Once this is complete,
you can enjoy real surround sound while watching TV in
the comfort of your own home.
3
Turn on the power of your TV.
4
Press TV on the remote control to display the
OSD of this unit on your TV screen.
It may take a few seconds before this unit's OSD
appears on your TV screen.
If the OSD does not appear, use the remote control
provided with your TV to switch the video input until
the OSD appears.
Remote control
H.I
Ruro: P.t·~RLOI3
Front panel
aso
screen example
24