Sound Menu - Yamaha YSP-800 Owner's Manual

Use to manually adjust various parameters related to the
sound output.
SET MENU ~ MANUAL SETUP ~ SOUND MENU
-:. f1) TOt~E CorH~:OL
B)BEHt1 LEUEL
OSUBIJJOOFER SET
\) H1UTE LEUEL
E)RUDIO DELf1'/
F)ROOt1 EQ
13)DD/DTS
D'=,n3r~ic R.an9"
[.iJ"'[°'f]:Uf>,ooo\)':Jwn
[EtHER J: Enter"
• TONE CONTROL (Tone control)
You can adjust the tonal quality of your speakers.
-:. TREBlE····0r.lB
- + - -
BRSS· ••••
·0dB
-+---
[o;!.J/[ l"J: UFo/C'o'Jn[-<4],o0[l"J:
5,,1
[EtHERJ:
~:"t'"wn
TREBLE (Treble)
Use to adjust the high frequency response.
Choices: -12 dB to +12 dB
Initial setting: 0 dB
BASS (Bass)
Use to adjust the low frequency response.
Choices: -12 dB to +12 dB
Initial setting: 0 dB
MANUAL SETUP
• BEAM LEVEL (Beam level)
Use to manually balance the speaker levels between the
front left or surround left speakers and each speaker
selected.
When setting the front right, center or surround left
speakers or the subwoofer, the test tone is output from the
front left speakers and the selected speaker position.
When setting the surround right speaker, the test tone is
output alternately from the surround left and right
speakers.
The factory default value is automatically set for this
parameter depending on the parameters set in AUTO
SETUP, BASIC SETUP or ROOM EQ in MANUAL
SETUP.
Depending on the beam mode settings, some channels
may not be available for selection. In this case, NONE is
displayed.
E:)
BERt
r
1LEi' ) EL
-:. FR
II
C
II
SL H
SR H
51JJFR
II
I'OUT: FL ~ FR
l't'10DE: 5 BERt'1
[.o.J/[0'l'J: Ijp/Down[-<I J 00[1>-] :
5,,1
[EfHE~:]: Returon
• FR
adjusts the balance of the front left and front right
speakers.
• C
adjusts the balance of the front left and center
speakers.
• SL adjusts the balance of the front left and surround
left speakers.
• SR
adjusts the balance of the surround left and
surround right speakers.
• SWFR
adjusts the balance of the front left speaker and
subwoofer.
69
I