Target Mode - Yamaha YSP-800 Owner's Manual

Outputs sound beams in a single channel. This mode is
ideal if you do not want the sound beams to be reflected
on the walls in your listening room or if you do not disturb
others asleep while enjoying music or movies at night.
BEAM MODE
Press TARGET on the remote control to select
the target mode and then press
~
I
t>
to adjust
the angle.
Control range: L90° to R90°
• Press
~
repeatedly to increase the horizontal angle on
the left side.
• Press
t>
repeatedly to increase the horizontal angle on
the right side.
In addition, you can adjust the horizontal angle of the
sound beams so that you can hear dialogues clearly even
from a distant location such as the kitchen area in your
listening room.
H l··,/Ci LE
II II II
::
• The sound beams are not rebounded off the walls in your
listening room.
• If the target mode is selected as the beam mode, the surround
modes (see page 44), the CINEMA DSP programs (see
page 49) and the TruBass (see page 54) become ineffective. In
addition, no audio is output from the subwoofer connected to
this unit.
43
I