Table of Contents
Advertisement
VCR PLAYBACK SCREEN DISPLAY CONTROL
S S
STILL
7
English
Split Screen Viewing
By pressing the MULTI button, you can select one of the 8 split screen
combinations. The camera indicators corresponding to the cameras displayed
on-screen come on.
NOTES:
•
The unit will remember the selected screen display, and when turned on again it will
automatically go back to the screen display combination selected before it was turned off.
•
If a camera picture is not recorded, the message "NO VIDEO" will be displayed on screen.
x2 Zoomed In Image Viewing
Example: To watch the image from camera 14 at x2 zoom.
1
Press the ZOOM button, then press the camera SELECT (14) button.
The image will be zoomed in, and "Z" will flash. (The ZOOM indicator and the camera (14)
indicator will flash.) To cancel the zoom mode, press the ZOOM button one more time.
•
The image can also be zoomed in when the screen is split in 4.
2
To switch to full screen display and to set the zoomed in image position.
While in zoom mode ("Z" displayed), press the camera SELECT (14) button for about 3
seconds. The zoomed image will be displayed full screen, and "SET" will be displayed. Using
the following buttons adjust the zoomed in image position.
•
Button O : To lower the image.
•
Button « : To move the image towards the right.
NOTES:
•
About 10 seconds after having set the image position, the display will automatically return
to the original split display.
•
The zoomed in image position is memorized and it will return to that position the next time
the zoom function is used.
3
To freeze a zoomed in image.
While in zoom mode ("Z" displayed), press the STILL button, then press the camera
SELECT (14) button. You can then view a zoomed in freezed image, and "ZS" will flash.
To return to normal zoomed in mode, press the camera SELECT (14) button. To return to
normal viewing mode, press the STILL button, then press the ZOOM button.
Freezed Image Viewing
Example: To freeze the image from camera 7.
Press the STILL button, then press the camera SELECT (7) button. You can then
view a freezed image, and "S" will flash instead of the camera number (7). To
return to normal viewing mode, press the STILL button again.
21
Monitor 1
Advertisement
Table of Contents
