Table 1.114 Buttons In The [Snmp V3 Configuration] Window - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations
1.5 [Network Configuration] Menu

TABLE 1.114 Buttons in the [SNMP v3 Configuration] window

Buttons
Apply Sets the specified information.
Cancel Restores the original information and does not set the specified information.
(1) Menu Operation
[Network Configuration] - [SNMP Configuration] - [SNMPv3 Configuration]
(2) Window Operations
- Correcting the information on the selected user
1. Check the check box of the user. Then, enter any necessary information. Finally, click the
[Apply] button.
This enables the information on the selected user. Meanwhile, the SNMP Service stops once
and then restarts.
- Disabling the selected user
1. Check the check box of the user to set to disable. Leave the [User Name] blank. Then, click the
[Apply] button.
This disables the selected user.
[Message]
The following table lists the messages displayed in this window.
Message Number
I_00013 Setting completed.
For details on the messages displayed on the window, see
(CA92344-0540).
Description
Message
PRIMEQUEST 2000 Series Message Reference
249
CA92344-0539-04