Table 1.54 [Mmb#X] Window Button - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations
1.2 [System] Menu for PRIMEQUEST 2400E2/2800E2/2400E/2800E
Buttons
On Turns on the Location LED when the [On] button is clicked.
Off Turns off the Location LED when the [Off] button is clicked
Apply Click the [Apply] button to set the specified control information.
Cancel Click the [Cancel] button to restore the original information and not set the specified information.
(1) Menu Operation
[System] – [MMB] – [MMB#x]
(2) Window Operations
Confirmation dialogue box is displayed. Specify the information which shows the change in MMB
status, click the [Apply] button. Sets the information which shows the change in MMB status.
[Message]
This section describes the messages to be displayed on this window.
Message Number
I_00013 Setting completed.
I_00052 MMB switch processing has started.
I_00095 The standby MMB is rebooting now. Please wait several minutes.
E_00100 Failed to set the LED
E_00125 Failed to switch over to another MMB.
E_00125 Failed to change Enable/Disable status of the MMB.
E_00125 Failed to reset the MMB.
I_00213 %aa cannot be executed because the system is under maintenance.
I_00467 The reboot is done. Login after a while.
W_00413 Nothing is selected.
W_00576 Unable to execute Enable / Disable because the firmware is updating.
W_00576 Unable to execute Switch Over to MMB because the firmware is updating.
W_00576
Unable to execute Reset MMB because the firmware is updating.
For details on the messages displayed on the window, see
(CA92344-0540).

TABLE 1.54 [MMB#x] Window button

139
Description
Message
PRIMEQUEST 2000 Series Message Reference
CA92344-0539-04