Panasonic AJ-PG50 Operating Instructions Manual page 96

VIDEO
I/F SETUP > VIDEO
Item
Selects the video input signal.
HD SDI: Selects the SDI connector (HD signal input).
SD-SDI: Selects the SDI connector (SD signal input).
HDMI: Selects the HDMI IN connector.
INT SG: Selects the internal signal generator. The signal switches to the internal signal se-
lected in the INT SG menu item.
Note
INPUT SEL
• This unit does not support 60 Hz JUST frequency signals. For the input signals, use
59.94 Hz or 50 Hz signals.
• The unit can only receive the signal format configured in the "LINE&FREQ" setting, so
be sure that the format of the input signal matches that setting.
• When an input signal cannot be received, the "INVALID INPUT FORMAT" warning will
be displayed and the video will be black and muted.
• The HD SDI / SD SDI item is displayed in accordance with the "LINE&FREQ" setting.
Sets the internal signal type. SMPTE and ARIB signals are enabled only when the
"LINE&FREQ" setting is set to the HD format (black in SD mode).
100%CB: 100% color bar
INT SG 75%CB: 75% color bar
SMPTE: SMPTE color bar
ARIB: ARIB color bar
BLACK: Black
Switches to the function for displaying a square that automatically changes its position on
the INT SG.
SG MOVE
ON: Displays.
OFF: Does not display.
Sets whether to record the WIDE information when "LINE&FREQ" is set to "480-59.94i" or
"576-50i."
WIDE SEL
WIDE: Records the information.
NORMAL: Does not record the information.
Selects whether to superimpose EDH on SD SDI output signals.
EDH(SD) ON: Superimposes EDH.
OFF: Does not superimpose EDH.
Selects the video signal output from the video output connector.
AUTO:
Switches output automatically in accordance with the current recording and playback for-
mat.
• When 59.94 Hz is set
1080P: 1080/59.94p
720P: 720/59.94p
1080i: 1080/59.94i
480i: 480/59.94i
OUTPUT FORMAT
• When 50 Hz is set
1080P: 1080/50p
720P: 720/50p
1080i: 1080/50i
576i: 576/50i
Note:
• When other than "AUTO" is selected, a signal that differs from the recording and play-
back format is automatically converted before output.
• This is not displayed when "LINE&FREQ" is set to "480-59.94i" or "576-50i."
Switches HDMI output to interlaced signals or progressive signals when "LINE&FREQ" is
"480-59.94i" or "576-50i," or "OUTPUT FORMAT" is "480i" or "576i."
• When 59.94 Hz is set
HDMI OUT 480i: Outputs as interlaced signals (480/59.94i).
FORMAT 480P: Outputs as progressive signals (480/59.94p).
• When 50 Hz is set
576i: Outputs as interlaced signals (576/50i).
576P: Outputs as progressive signals (576/50p).
96
Setup Menu: Menu List
Settings and brief function description
_ is the factory default setting.
FREQ indications
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz