Panasonic AJ-PG50 Operating Instructions Manual page 88

CLIP > PROPERTY (Continued)
Item
Sets or changes the names of partitions in a storage device.
Note:
CHANGE
• The default value is the date and time when the partition was created.
PARTITION NAME
• This is enabled only for TYPE S storage devices.
• This is displayed only when storage explorer.
Deletes the last partition on a storage device.
DELETE LAST Note:
PARTITION
• Deletion is possible only when the cursor is on the last partition.
• This is displayed only when storage explorer.
DELETE FOLDER Deletes a folder on a storage device in FAT format.
THUMBNAIL SETUP
CLIP > THUMBNAIL SETUP
Item
Select any of the following items you want to display and press the [SET] button to add a
check mark to the item. When "ALL HIDE" is selected, other items cannot be selected.
ALL HIDE: Hides all of the indicators.
MARKER: Displays the shot marker indicator.
TEXT MEMO: Displays the text memo indicator.
INDICATOR
WIDE: Displays the wide indicator.
PROXY: Displays the proxy indicator.
Note:
Regardless of the above settings, the bad clip indicator (
cator, and incomplete clip indicator are always displayed.
Selects the items to display in the time display.
TC: Time code
UB: User bits
TIME: Time of recording
DATE: Date of recording
DATA DISPLAY
DATE TIME: Date and time of recording
CLIP NAME: Clip name
USER CLIP NAME: Up to the first fifteen characters in the user clip name
SLOT: Slot number
THUMBNAIL TC: Time code of thumbnail position
Sets the size of thumbnails displayed on the screen in thumbnail mode.
SMALL: Small (thumbnail display 4 x 3, property display)
THUMBNAIL SIZE
MEDIUM: Standard (thumbnail display: 4 x 3)
LARGE: Large (thumbnail display: 3 x 2)
Sets the playback start position for playback on the thumbnail screen.
RESUME: Plays from the position where playback was stopped.
PB POSITION
THUMBNAIL TC: Plays from the time code of the thumbnail position.
START TC: Plays from the start time code (beginning of the clip).
Sets the display order for thumbnails.
OFF: Recorded order
SORT
SLOT: Slot order (clips in the same slot are displayed according to the date and time of re-
cording)
88
Setup Menu: Menu List
Settings and brief function description
Settings and brief function description
_ is the factory default setting.
)/( ), unknown clip indi-
FREQ indications
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
FREQ indications
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz