Names And Functions Of The Parts Of The Thumbnail Screen - Panasonic AJ-PG50 Operating Instructions Manual

Names and Functions of the Parts of the Thumbnail Screen

1
18 2
1.
Display status
The following information is displayed on the screen.
ALL:
SAME FORMAT:
SELECT:
MARKER:
TEXT MEMO:
SLOT n:
P2 / REMAIN:
P2 / USED:
META DATA:
Procedures for switching between displays
(➝ "Changing the Thumbnail Display" page 40)
2.
Recording mode
Indicates the recording mode of the clip at the cursor po-
sition.
3.
System format
Indicates the recording format of the clip at the cursor po-
sition.
38
Main Mode: Thumbnail Screen
17
3
All clips
Clips with the same format as the
system
Clips selected with the [SET] but-
ton
Clips with shot markers added
Clips with text memo data added
Clips on the P2 card in slot No. n
Media information (amount of re-
maining free space)
Media information (amount of
space used)
Set metadata
16 21
19
7
6
4 5
4.
Duration
Indicates the length (duration) of the clip at the cursor po-
sition and the rough current playback position in relation to
the length of the clip.
Playback position display is enabled when "RESUME" is
selected in the "PB POSITION" (➝ page 88) menu item.
When the playback start position is not the beginning of
the clip, the rough current playback position is indicated.
5.
Number of selected clips and playback time display
Indicates the number of selected clips, the playback time
for the displayed clip, etc.
(➝ "Setting the display of the number and durations of
clips" page 41)
6.
Clip information display
One of the following is indicated: TC (time code), UB (user
bits) at the start of clip recording, time of shooting, day of
shooting, date and time of shooting, clip name, user clip
name, and slot number.
(➝ "Changing the Thumbnail Display" page 40)
7.
Thumbnail
Shows the thumbnail recorded for each clip. You can use
the EXCH.THUMBNAIL function to change this thumbnail.
(➝ "Changing the Thumbnail Display" page 40)
8.
Clip number
Indicates the numbers assigned to P2 card clips, which
are normally assigned in order from the earliest shooting
date. For a clip that cannot be played back, the clip num-
ber is red and the unplayable indicator is displayed. You
can change the order in which clips appear using the
function for displaying clips in the order of selection or the
SORT function.
(➝ "Changing the Thumbnail Display" page 40)
9.
Shot mark indicator
Indicates that a shot mark has been added to the clip.
8 9 101 11213
20
14
15