Options
Delay Start with EcoStart
There are three ways of delaying the
start of a program. You can set the start
time or the finish time of a program.
You also have the option of taking ad‐
vantage of time variable economy rates
of electricity using the
When using the Delay Start function,
make sure that the detergent com‐
partment is dry before adding deter‐
gent. Wipe dry with a cloth if neces‐
sary. If the compartment is wet,
powder detergent can become lum‐
py and stick to the dispenser, with
the result that it is not fully dis‐
pensed.
Do not use liquid detergent when se‐
lecting Delay Start, as it can run into
the dishwasher before it is required.
Open the door.
Turn the dishwasher on using the
sensor button.
Select the program you want from
the main menu.
Press the button.
The indicator light will light up.
52
function.
EcoStart
You then have a choice of
, and
.
at
EcoStart
Select the function you want.
Now enter the required time.
If, while you are setting the time, you do
not press any buttons for several sec‐
onds, the display will revert to the previ‐
ous menu. You will then have to enter
your settings again.
If you keep the relevant arrow button
pressed, the value shown will auto‐
matically increase or decrease.
If you open the door for more than
four seconds before the start time is
reached, the message
appears in the display. Confirm with
OK and close the door within four
seconds to restart the delay start.
,
Start at
End
Continue with OK