Program selection
buttons
Program list
Starting a pro-
gram using delay
start
Selecting a program
Select a programme using program selection buttons , ,
or .
Press the button and
use the and arrow buttons to highlight a program and confirm
your selection with OK.
The LED in the button selected lights up and the relevant program ap-
pears in the display. The LED in the Start/Stop button also starts to
flash.
Another program can be selected at any time before a program has
started. Once it has started, program selection is locked.
The different programs and their uses are described in "Program
charts" at the end of these operating instructions.
Always select the program depending on the type of wash items and
degree and type of soiling, or on infection prevention issues.
Starting a program
Close the door.
Press the Start/Stop button.
The LED in the button will light up constantly.
The start of a program can be delayed (to benefit from economy rates
of electricity, for example, or to clean the wash cabinet before it is
used the next day). Starting from the programmed time, a delay start
time between 1 minute and 24 hours can be selected in one-minute
increments (see "Settings /Time of day").
Delay start must be switched on (see "Settings /Delay start").
If soiling is left to dry on the wash items for a long time, the repro-
cessing result can be adversely affected. There is also a risk of cor-
rosion for stainless steel wash items.
Normal
Temperature
60 °C
Duration
20
Operation
Min
55