Rinse Aid; Sensorwash; Autoopen - Miele G 6980 Operating Instructions Manual

Settings menu

Rinse aid

You can adjust the rinse aid dosage for
best results.
The rinse aid dosage is set in stages
from 0 to 6.
It is set to 3 at the factory.
The rinse aid dosage can turn out to be
higher than the set value due to the au‐
tomatic adjustment of the
program.
If spots appear on dishware and glass‐
ware:
– Increase the rinse aid dosage.
If clouding or smearing appears on
dishware and glassware:
– Decrease the rinse aid dosage.
 Use the  arrow buttons to set the
level you want and confirm with
60

SensorWash

You can adjust the
gram so that it will remove stubborn
soiling in a lightly soiled load.
 Select the setting you want and con‐

AutoOpen

Sensor Wash
At the end of programs with a drying
phase (except
open automatically a little in order to
help the drying process (see "Program
overview").
In the
mode), the door will open automatically
during the drying phase.
This function can be deactivated if
wished.
 Select the setting you want and con‐
.
OK
firm with .
OK
Extra Quiet
program (depending on
ECO
firm with .
OK

If you have deactivated the auto‐
matic door opening function and
would like to open the door as soon
as the program has finished, make
sure that you open the door fully.
Otherwise steam from the dishwash‐
er could damage the edge of the
counter because the fan is no longer
running.
pro‐
Sensor Wash
), the door will