Check Filters; Changing The Main Menu - Miele G 6980 Operating Instructions Manual

Settings menu
Refill indicators
If you consistently use a Tab detergent
and the refill indicators for salt and rinse
aid are bothering you, you can deacti‐
vate them if you wish.
 Select the setting you want and con‐
firm with .
OK
If you switch to using detergent that
does not contain salt or rinse aid, it
is important to remember to add
dishwasher salt and rinse aid and to
switch the indicators back on.

Check filters

You can adjust the interval at which the
message to remind you to check the fil‐
ters appears.
You can set an interval between 30 and
60 program cycles.
The "Check filters" message is set at
the factory to appear after every 50 pro‐
gram cycles.
 Select the interval you want and con‐
firm this with
OK
62
.

Changing the main menu

You can change the order of the pro‐
grams in the program selection menu
and also enter your favorite programs
into the first two program places.
 Select the programs you want to
place in the first and second position
of the program selection menu.
 Confirm each position with
The programs you have selected will
then appear together in the display.
 If you are happy with the order in
which they are shown, confirm with
.
OK
 To change the order in which they are
shown, select
Change main menu
Enter the settings again.
.
OK
.