Special Features; Recovery From Ac Power Loss; Pc Health Monitoring; Fan Status Monitor With Firmware Control - Supermicro X10DRL-CT User Manual

X10DRL-CT/-iT/-C Motherboard User's Manual
1-3

Special Features

Recovery from AC Power Loss

The Basic I/O System (BIOS) provides a setting that determines how the system will
respond when AC power is lost and then restored to the system. You can choose for
the system to remain powered off (in which case you must press the power switch
to turn it back on), or for it to automatically return to the power-on state. See the
Advanced BIOS Setup section for this setting. The default setting is Last State.
1-4

PC Health Monitoring

This section describes the features of PC health monitoring of the motherboard.
This motherboard has an onboard Baseboard-Management Controller (BMC) chip
that supports system health monitoring. An onboard voltage monitor will scan the
following onboard voltages continuously: +3.3V, 3.3V Standby, +5V, +5V Standby,
+12V, CPU Core, Memory, Chipset, and Battery Voltages. Once a voltage becomes
unstable, a warning is given, or an error message is sent to the screen. The user
can adjust the voltage thresholds to define the sensitivity of the voltage monitor.

Fan Status Monitor with Firmware Control

System-health monitoring support provided by the BMC controller can check the
RPM status of a cooling fan. The onboard CPU and chassis fans are controlled by
IPMI Thermal Management.

Environmental Temperature Control

System-health sensors monitor temperatures and voltage settings of onboard
processors and the system in real time via the IPMI interface. Whenever the tem-
perature of the CPU or the system exceeds a user-defined threshold, system/CPU
cooling fans will be turned on to prevent the CPU or the system from overheating.
Note: To avoid possible system overheating, please be sure to provide
adequate airflow to your system.

System Resource Alert

This feature is available when used with SuperDoctor 5 in the Windows OS or Linux
environment. SuperDoctor 5 is used to notify the user of certain system events.
For example, you can configure SuperDoctor 5 to provide you with warnings when
the system temperature, CPU temperatures, voltages, and fan speeds go beyond
a predefined range.
1-12