Sharp MX-2615N Configuration Manual page 52

Step 2: chooSe finiShing configuration
Configuration D: Advanced 100-sheet Staple Finishing
D This configuration requires the MX-RB18 and an MX-FN21 or MX-FN22.
• The MX-CF11, both MX-ST10s, MX-GBCX2, MX-FD10, and Plockmatic Production Booklet Maker System are all optional.
• The MX-GBCX2 requires the MX-RB13.
• The MX-RB13 or MX-FD10 is required to connect a 100-sheet finisher and 2-Tray Inserter Unit directly.
• The MX-FN21 cannot be used with the MX-FN22.
• The MX-BM50 requires the MX-FN21.
• The MX-FD50 must be connected to the MX-TM50.
• The MX-SL10 Status Indicator can be added to any configuration.
and/or and
MX-RB13 MX-GBCX2
Relay Unit GBC SmartPunch
Pro TM
Plockmatic Production Booklet Maker System
Exit Tray Included MX-CF50
with MX-BM50 Cover Feeder
and
MX-FD50 MX-TM50
Square Fold Face Trimmer
Module Module
MX-XB50
Rail Unit (recommended)
© 2013 Sharp Electronics Corporation. All rights reserved.
mX-m904/m1054/m1204
and/or and/or
MX-ST10
High Capacity
Stacker
and
and
and
MX-BM50
Booklet Maker
and
and/or
MX-ST10 MX-CF11
High Capacity 2-Tray
Stacker Inserter Unit
MX-PN13B
3-Hole
Punch Unit
or
and
MX-PCB50 MX-FN21
Plockmatic Finisher 4K
Interface Kit
(100-sheet staple)
configuration chart
(continued)
MX-SL10
Status Indicator
(optional)
and
D
MX-RB18 MX-M904/M1054/M1204
Curl Correction
Unit
MX-TM10
Trimming Unit
and (continued)
MX-FN22 MX-FD10
Saddle Stitch Multi-Folding
Finisher 4K Unit
(100-sheet staple)
52