Sharp MX-2615N Configuration Manual page 36

SPACE REQUIREMENT AND PLANNING GUIDE
MX-M232D
Main Unit
A
B
Plan ahead to make sure your installation is a great success!
Remember to check the latest information on these products and confirm
that the following items are available prior to installation.
□
Verify power dedication and check for power stability. The MX-M232D Multifunction Document Systems
require AC 120V, 60Hz, 15 Amps power source (machine draws 12 Amps).
□
Confirm that you have the latest firmware available to upgrade the MX-M232D Multifunction Document
Systems immediately.
□
Some accessories require a product key for operation.You should obtain the accessory Application Code,
machine's serial number and register online prior to arrival.
□
Make sure the customer has enough supplies on-hand to do a large rush job. After-hours printing
and/or holiday work may take place immediately following an installation.
MX-235NT Toner
MX-235NV Developer
AR-205DR Drum
□
Check to see if My Sharp™ online training is set up for the end-user.
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, NJ 07495-1163
1-800-BE-SHARP • www.sharpusa.com
© 2011 Sharp Electronics Corporation. All rights reserved.
MX-M232D Main Unit MX-M232D + AR-D36
(with standard RSPF)
C
E
D
F
10/11
MX-M232D + AR-D37
G
H
Deluxe High - AR-55ABDH
Deluxe Low - AR-55ABDL
Design and specifications subject to change without notice. Sharp and My Sharp are trademarks or registered trademarks
of Sharp Corporation and/or its affiliated companies. All other trademarks are the property of their respective owners.
MX-M232D
MEASUREMENTS
A
23.50" E 11.75"
B 21.50" 35.25"
F
23.50" 28.5"
C G
D 23.50" H 30.25"
Approximately
24" W x 19.25" D x 20" H
Approximately
24" W x 19.25" D x 12.25" H
36