Specifications - Canon Trimmer-A1 Operation Manual

Specifications

Specifications
Two-Knife Booklet Trimmer-A1
NOTE
Whenever a number of sheets is mentioned in the table below, the figure is based on media of
80 g/m² (20 lb bond).
Specifications of Two-Knife Booklet Trimmer-A1
Item
Description
Maximum number of sheets trimma-
ble
Possible trim size (before half-fold-
ing)
Possible trim width
Trimmer waste box capacity
Conveyor capacity
Machine dimensions (without con-
veyor section and delivery tray)
Machine weight (without conveyor
section and delivery tray)
Voltage
Power consumption
Noise level
Temperature in use
30 Appendix A - Specifications
Operation Guide Two-Knife Booklet Trimmer-A1: VarioPRINT (VP) 110, VP120, VP135 - Edition 2013-06
Specifications
Top-bottom trimmer
50 sheets or 48 sheets + 2 sheets of 300 g/m² (110 lb cov-
er)
NOTE
To prevent damage to cover sheets, it is rec-
ommended to use thicker sheets for covers
than the other sheets in booklets.
A3, B4, A4R, 330.2 mm x 487.7 mm (13" x 19.2"), 12" x
18", 11" x 17", Legal, LetterR, 320 mm x 450 mm [SRA3]
(12.60" x 17.72").
NOTE
The possible trim size can change, depending
on the connected printer.
Top-bottom: 2 to 15 mm (0.08" to 0.59").
The top-bottom length after trimming must be at least
190 mm (7.48").
Trimmed at top AND bottom: trim strips of +/- 750
sheets.
Trimmed at top OR bottom: trim strips of +/- 1,500
sheets.
30 booklets containing 40 sheets of A4 / Letter when
trimming 20 mm (0.79") of width in Booklet Trimmer-D1.
NOTE
When the delivery tray is removed, the con-
veyor full condition is not detected. Continu-
ous operation is possible.
WxDxH: 536 mm x 770 mm x 1,040 mm (21" x 30.5" x
41")
Approximately 145 kg (319 lb)
220-240 V AC, 50/60 Hz, 2.3 A
440 W or less
70 dBA or less
Compliant with the specification of the printer
4
Canon Two-Knife Booklet Trimmer-A1