Operation While Trimming - Canon Trimmer-A1 Operation Manual

Operation while trimming

Introduction
This section describes the main actions when using the trimmer.
Illustration
[4] Empty the delivery tray and the trimmer waste box
A Delivery tray
B Trim Full sensor
C Trimmer waste box
Empty the delivery tray
When the machine stops because the delivery tray is full, you must remove the booklets from the
delivery tray.
The machine will restart automatically.
NOTE
• When you remove the booklets before the delivery tray is full, you can increase the
productivity without interrupting the operation.
• Be careful not to drop a booklet while removing it.
Empty the trimmer waste box
You must empty the trimmer waste box when:
Canon Two-Knife Booklet Trimmer-A1
Operation Guide Two-Knife Booklet Trimmer-A1: VarioPRINT (VP) 110, VP120, VP135 - Edition 2013-06
Operation while trimming
Chapter 3 - Operating procedures 19