Table of Contents
Advertisement
Canon
IX. Appendix
A. Supported Devices
Table 22 – Supported Devices
imagePRESS C7010VP/C6010VP/C6010
imagePRESS C7010VPS/C6010VPS/C6010S
imagePRESS C7011VP/C6011VP/C6011
imagePRESS C7011VPS/C6011VPS/C6011S
varioPRINT 135/120/110
B. Specifications
Table 23 – BLM300C Professional Booklet Maker Specifications
Item
Supported Paper size
Supported Paper Weight
Maximum number of
sheets per Booklet
Maximum Staple Capacity Up to 30 sheets of 80 g/m
Speed
Noise Level
: 2
Power source
Dimensions (H x W x D)
Weight
Temperature
Humidity
2
Canon USA strongly suggests that the power receptacle for the BLM300C Professional Booklet-Maker
is connected to a separate breaker from the power receptacle for the SDD Rotator Module. This is
necessary to maintain adequate current for the Professional Booklet-Maker and each of the modules.
BLM300C Professional Booklet Maker Service Support Guide
Revision 2
BLM300C Professional Booklet Maker Service Support Guide
Device
BLM300C Professional Booklet Maker
5.5" x 9.76" (140 mm x 248 mm) to 12.6" x 18.5" (320 mm x 470 mm)
2
2
60 g/m
- 300 g/m
Up to 30 sheets of 80 g/m
A4 size or equivalent: Up to 2,980 booklets/hour
A3 size or equivalent: Up to 2,610 booklets/hour
Up to 70dB
100/110/120/127V, 60Hz
Required Current: up to 8.0 A (for the BLM 300C (BLM6700))
Required Current: up to: 12.6 A for the BLM 300C (BLM6700) when connected
with the Front Trimmer BLT6989, 2-Knife Trimmer STR6702 , Square Fold
SFM6904, and a Belt Stacker (BST6800 or BST6900).
Operational: Approximately 45 1/4" x 35 7/8" x 27 1/2"
(1,150 mm x 910 mm x 700 mm)
On Pallet in box: Approximately 51 1/4" x 47 1/4" x 31 1/2"
(1,300 mm x 1,200 mm x 800 mm)
Operational: Approximately 363.8 lb (165 Kg)
On Pallet in Box: Approximately 474 lb (215 Kg)
Between 62.6°F (17°C) and 89.6°F (32°C)
30% – 65% Relative Humidity
Required Equipment
High Capacity Stacker-F1
Specification
2
2
, or up to 0.23" (6 mm) in height
July 2014
Page 27
Advertisement
Table of Contents
