Overview Of Possible Errors - Canon Trimmer-A1 Operation Manual

Overview of possible errors

Introduction
When an error occurs in the trimmer, the printer operator panel displays a corresponding
message. The table below describes possible solutions for trimmer-related errors.
Illustration
[8] Error locations
Possible errors
Errors and solutions
Cause of error
The top cover is open.
The delivery tray is full.*
The trimmer waste box is full.
A booklet jam has occurred at the entrance of
the two-knife trim section.
Canon Two-Knife Booklet Trimmer-A1
Operation Guide Two-Knife Booklet Trimmer-A1: VarioPRINT (VP) 110, VP120, VP135 - Edition 2013-06
Solution
Close the top cover (1).
Lift the E handle and remove the booklets
from the conveyor section.
Empty the trimmer waste box. If any trim
waste is left in the delivery chute, then remove
the trim waste.
• Open the delivery section cover (2) of the
upstream trimmer.
• Open the top cover (1).
• Open the A and F2 transport unit, and re-
move the jammed booklet.
• Reposition the A and F2 transport unit,
and close the top cover (1) and the delivery
section cover (2) to restart the printing.
Chapter 4 - Troubleshooting
Overview of possible errors
4
25