Chapter 4 Datawedge Scanner Connection; Introduction - Motorola VC70N0 Product Reference Manual

Chapter 4 DataWedge Scanner Connection

Introduction

This chapter describes how to install the scanners and accessories for the VC70 vehicle computer.
NOTE The DataWedge application utility is included in the VC70 software image.
IMPORTANT DataWedge may require up to seven seconds to launch, find and connect to a scanner and be ready
NOTE When using Wavelink TE, the DataWedge should not be running for best performance, unless it is
specifically planned for.
Once DW (DataWedge) is started, it will be running in the background. To make sure DataWedge is
disabled when TE is running create a profile within DataWedge, associate the Wavelink TE to this profile,
then uncheck the Enabled option for that profile. This will disable DW when Wavelink TE is running, but
allow DW to be used for other apps.
Refer to the Help file in the DW Toolkit available on the VC70 page on Support Central:
https://portal.motorolasolutions.com/Support/US-EN/Resolution?solutionId=88037
to read bar codes.