3 - 32 VC70 Vehicle Computer Product Reference Guide
TouchPanel Heater
The temperature of the touch pad (touch screen) of the VC70 can be automatically controlled bay the TouchPanel
OverHeat applet.
By default, the heater operation is set to start at +10°C (50° F) and stop at +20°C (68° F).
The TouchPanel OverHeat applet can also be set to generate an alert if the temperature of the touch screen is
beyond pre-defined values.
TouchPanel OverHeat Applet
Figure 3-36
To configure the Desiccant Warning applet:
From the VC70 desktop, tap
1.
Run "SensorsConfig.exe". The Config Sensors Utility opens.
2.
Tap the TouchPanel OverHeat tab.
3.
Set the required parameters.
4.
Tap
to save changes.
5.
Apply
Real Time Log
The Real Time Log application monitors the VC70 operation and logs real time events in a log file.
To update and view a log file:
On the VC70 desktop, double tap RTLogExport
1.
update is indicated by sound feedback.
From the VC70 desktop, tap
2.
Double tap to open the RTLog_xxxxxxxxxxxxxx file.
3.
> Programs > Windows Explorer > Windows
to trigger an updated of a log file. A successful log file
> Programs > Windows Explorer > ExportLogs > Logs
.
.