Connect A Bluetooth Scanner Ls3578 Directly To The Vc70 (Spp Profile) - Motorola VC70N0 Product Reference Manual

5 - 62 VC70 Vehicle Computer Product Reference Guide

Connect a Bluetooth Scanner LS3578 Directly to the VC70 (SPP Profile)

NOTE To improve performance, use StoneStreet one Bluetooth stack.
To connect a Bluetooth scanner to the VC70:
Ensure that the scanner battery is fully changed.
1.
Scan the
2. Set All Defaults
Set All Defaults Bar Code
Figure 5-84
NOTE The Set All Defaults Bar Code allows the scanner to reset from any previous configuration to the default
configuration.
Scan a
3. SPP Profile
SPP Profile Bar Code
Figure 5-85
Scan Write to Custom Defaults bar code.
4.
Custom Default Bar Code
Figure 5-86
To pair the scanner with your VC70, scan the pair label bar code on the upper right side of the VC70.The
5.
scanner beeps indicating that it is successfully connected to the VC70.
Enter the following configuration details:
6.
•
Tap
> Programs > BTScannerCtlPanel
•
Check
BT Scanner
•
Select Comm port
•
Tap and
Save
From Wavelink web site, download l the Wavelink MOT_VC7000_CE7 TelnetCE application
7.
(https://www.wavelink.com/Orders/files/WLTE_MOT_VC7000_CE7_7_3_158_AS.exe)
Install the Wavelink MOT_VC7000_CE7 TelnetCE application on a PC used for configuring the VC70.
8.
bar code.
bar code to configure the scanner to Bluetooth SPP profile mode before the pairing.
COM9
Exit