Table of Contents
Advertisement
Wiper controls
System for selection and control of the various
front and rear wiping modes for the elimination
of rain and cleaning.
The vehicle's front and rear wipers are
designed to improve the driver's visibility
progressively according to the climatic
conditions.
Programming
Various automatic wiper control modes are also
available according to the following options:
-
automatic rain sensitive windscreen wipers,
-
rear wiping on engaging reverse gear.
Model with intermittent wiping
Model with AUTO wiping
Manual controls
The wiper commands are issued directly by the
driver by means of the stalk A and the ring B.
Windscreen wipers
A. Wiping speed selection stalk.
Fast (heavy rain).
normal (moderate rain).
Intermittent (proportional to the
speed of the vehicle).
off.
Single wipe (press down and
release).
or
Automatic, then single wipe
(see the corresponding
section).
Visibility
5
71
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the C3 and is the answer not in the manual?
Questions and answers
I have a citroen c3 2010 and i open the care with remote from outside and i dont open the dor!!after 30 or 40 seconds he lock agein automatic!!how to fix this problem?thanx
To fix the automatic locking issue on a 2010 Citroën C3 when the door is not opened after using the remote, check the following:
1. Wiring Check – Inspect the wiring between the door and the door pillar for any damage.
2. Remote Key Test – Try using a spare remote key. If the issue occurs only with one key, the lock button on the faulty remote may be stuck.
3. Manual Unlock Test – Use the key in the door lock instead of the remote. If the car does not relock, the issue is likely with the remote key.
4. BSI Reset – Perform a BSI reset, as this can sometimes resolve locking issues.
5. Battery Check – Ensure the car battery and the key fob battery are fully charged.
6. Child Lock Inspection – If the child lock button is illuminated, check if it is affecting the central locking system.
7. Lock/Unlock Cycle – Try locking and unlocking the car manually using the key to reset the system.
If these steps do not resolve the problem, further diagnosis of the locking relays or the BSI may be required.
This answer is automatically generated