Table of Contents
Advertisement
Driving
Reversing camera
a reversing camera is activated automatically
when reverse gear is engaged.
The colour image is provided in the navigation
screen.
The reversing camera cannot in any
circumstances be a substitute for
vigilance on the part of the driver.
130
The space between the blue lines represents
the width of your vehicle except for the door
mirrors.
The blue lines represent the general direction
of the vehicle.
The red line represents a distance of about
30 cm beyond the edge of your vehicle's
rear bumper. The audible signal becomes
continuous from this limit.
The green lines represent distances of
about 1 and 2 metres beyond the edge of your
vehicle's rear bumper.
Clean the reversing camera regularly
using a soft, dry cloth.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the C3 and is the answer not in the manual?
Questions and answers
I have a citroen c3 2010 and i open the care with remote from outside and i dont open the dor!!after 30 or 40 seconds he lock agein automatic!!how to fix this problem?thanx
To fix the automatic locking issue on a 2010 Citroën C3 when the door is not opened after using the remote, check the following:
1. Wiring Check – Inspect the wiring between the door and the door pillar for any damage.
2. Remote Key Test – Try using a spare remote key. If the issue occurs only with one key, the lock button on the faulty remote may be stuck.
3. Manual Unlock Test – Use the key in the door lock instead of the remote. If the car does not relock, the issue is likely with the remote key.
4. BSI Reset – Perform a BSI reset, as this can sometimes resolve locking issues.
5. Battery Check – Ensure the car battery and the key fob battery are fully charged.
6. Child Lock Inspection – If the child lock button is illuminated, check if it is affecting the central locking system.
7. Lock/Unlock Cycle – Try locking and unlocking the car manually using the key to reset the system.
If these steps do not resolve the problem, further diagnosis of the locking relays or the BSI may be required.
This answer is automatically generated