Chapter 3 Network Software; Epsonnet Config For Windows; About Epsonnet Config - Epson 3250 Network Manual

Chapter 3
Network Software
This chapter explains how to use the network software provided with your printer.
Note:
The software provided varies depending on your printer model.

EpsonNet Config for Windows

About EpsonNet Config

EpsonNet Config is a Windows-based configuration software for administrators to configure the
network interface for TCP/IP, NetWare, MS Network, AppleTalk, and SNMP.
Note:
❏ Be sure to use EpsonNet Config included on the Software CD-ROM shipped with this product.
❏ EpsonNet Config installed on Windows Vista does not support NetBEUI and IPX as a search
protocol.
❏ EpsonNet Config installed on Windows XP/Server 2003/Server 2008 does not support NetBEUI
as a search protocol because officially the NetBEUI protocol is not supported on Windows XP/
Server 2003/Server 2008.
Note for users of printers supporting NetWare queue-based printing:
❏ If you are using the printer in a dial-up environment without running NetWare, clear the Use
NetWare check box on the NetWare screen. If this check box is selected, the extra account may
be charged when you use the dial-up router.
❏ When configuring the network interface for NetWare, use the IPX protocol and log in to the
NetWare server or the NDS context with supervisor privileges.
❏ When you configure the network interface for NetWare 5.x, you must log in to the NetWare
server using an IPX connection. If you log in to the NetWare server using an IP connection, the
NetWare screen and the IPX trap setting of SNMP are not available.
EPSON Network Guide
Network Software 89