Network Setup Menu; Instructions On Using A Dial-Up Router - Epson 3250 Network Manual

Note:
❏ You must first set the IP address before using EpsonNet Config with Web Browser.
❏ See the User's Guide for more information about settings on the printer's control panel.

Network Setup Menu

These items are used to make network settings on the printer's control panel.
Item
NETWORK SETUP
IP ADDRESS SETTING*
IP*
SM*
GW*
AppleTalk*
MS Network*
Bonjour*
INIT NETWORK
SETTING*
* Available only when Enable is selected for NETWORK SETUP.

Instructions on Using a Dial-Up Router

This section describes instructions on using a dial-up router.
If DHCP is used to assign an IP address of the printer and the Dynamic DNS function is not
supported, you need to change the printer port setting every time you turn on the printer.
Therefore, we recommend that you set a valid IP address for the network interface by using the
one of the following methods.
❏ Set the IP address for the network interface manually. Use EpsonNet Config. See the EpsonNet
Config User's Guide for details.
❏ Specify the network interface by using the bind of DHCP function.
Settings
Disable, Enable
Auto, Panel, PING
0.0.0.0 to 255.255.255.254
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
On, Off
On, Off
On, Off
EXECUTE
EPSON Network Guide
Tips for Administrator 128