Macintosh environment
Printers do not appear in Chooser.
Cause
You may have selected a wrong one for
"Connect via" in the AppleTalk Control
Panel.
The Bonjour/Rendezvous printer setting is overwritten by the AppleTalk printer setting.
Cause
The same printer is set up with AppleTalk
after the printer is set up with Bonjour/
Rendezvous.
NetWare environment
For users of printers supporting NetWare queue-based printing
Nothing prints even though clients have sent data to the printer.
Cause
Clients may not be registered, or the
network interface may not be logged in to
the NetWare server.
EpsonNet Config will not start correctly.
Cause
Microsoft NetWare Directory Service is
installed on your computer.
What to do
Make sure to select Ethernet in AppleTalk Control Panel, and make
sure AppleTalk is active in Chooser. Also, check the network
equipment including the hub cable.
What to do
Change the AppleTalk printer name so that it does not conflict with
the Bonjour/Rendezvous printer name.
What to do
Make sure clients are registered as users of the print queue and the
print server. Also, make sure the network interface is logged in to the
NetWare server.
What to do
If you are using the NDS service, install the Novell NetWare Client
service.
EPSON
Network Guide
Troubleshooting
119