Settings for NetWare Users
Overview
If you are using a printer that supports NetWare queue-based printing, see "Configuring the
Network Interface" on page 72 for detailed information.
Note:
To find out whether your printer supports NetWare queue-based printing, see the User's Guide.
Configuring the Network Interface
This section explains how to configure the network interface for NetWare. First, you need to set up
the printer in a NetWare environment, and then configure the network interface using EpsonNet
Config.
Introduction to NetWare settings
Supported systems
Server environment
❏ NetWare 3.1/3.11/3.12/3.2 (Bindery)
❏ NetWare 4.1/4.11/4.2 (NDS, Bindery emulation)
❏ IntranetWare (NDS, Bindery emulation)
❏ NetWare 5.0/5.1 (NDS, NDPS)
❏ NetWare 6.0 (NDS, NDPS)
Client environment
The client environment must be supported by NetWare. The clients are able to use the printer
driver mounted on the network interface.
The following Novell Client is supported.
❏ For Windows 98:
Novell Client 3.4 or later for Windows 98/95
EPSON
Network Guide
How To
72