Canon PIXMA MP980 series Quick Start Manual page 9

e
Install the Ink Tank
M OK GY PGBK
Press the PUSH mark on the ink tank until
it clicks into place.
Make sure the Ink lamp lights red.
A
• Be sure to install it in a well-lit environment.
• Match the labels when installing.
o
Install all the other ink tanks in the same
way.
Install all the ink tanks.
A
• Once you have installed the ink tanks, do not
remove them unnecessarily.
• Make sure all the Ink lamp lights red.
Head alignment required.
load a sheet of supplied
paper (MP-l 01) in the
rear tray and press
m:t.
Yes
Close the Scanning Unit (Cover) (B).
Wait until the screen above appears (about 6
minutes) and go to the next step.
• The machine may make some operating noises
when preparing to print. This is normal operation.
• For your safety, always grip as illustrated.
~
~
• If an error message is displayed on the LCD, make
sure that the Print Head and the ink tanks are correctly
installed.