Canon PIXMA MP980 series Quick Start Manual page 59

Next, read "8 Install the Software" on page 15!
The completion screen appears on the LCD of the
machine, then the LAN settings screen returns. Remove
the USB flash drive from the machine.
Connect the USB flash drive to the direct print port
(USB connector) on the front of the machine, then
press the OK button.
Following is completed.
WCN setting
~ WCN setting
Connect the USB flash drive
on which you have saved the
network information with the
WCN setting.
When finished, press
m
of
the device.
::r
Wireless LAN settings
WPS setting
WCN setting
Select WeN settings,
then press the OK button.
(' LAN settings
Change wireless/wIred
Wireless LAN settings
Wireless LAN setting list
Wired LAN setting list
IPv4/1Pv6 setting
WSD setting
Aeset LAN settings
Select Wireless LAN
settings, then press the
OK button.
Wireless LAN active
Wired LAN active
~
". Change wireless/wired
Select Wireless LAN
active, then press the OK
button.