Canon PIXMA MP980 series Quick Start Manual page 17

Go to Step
O.
Go to Step
€).
Windows Vista
Windows XP/
2000
Windows
• If the program does not start
automatically, double-click the CD-
ROM icon on the computer. When the
CD-ROM contents appear, double-click
MSETUP4.EXE.
Turn on the computer, then insert the
Setup CD-ROM into the CD-ROM drive.
The setup program should run automatically.
~
~
(A)
• Operating noise continues for about
30 seconds until the machine turns off.
Make sure that the POWER lamp (B)
stops flashing.
Press the ON button (A) to TURN
OFF THE MACHINE.
o
Don t show this message again for this device
VO\JI dlMCt
",,~I
not function Ulltl'
you
tn5Wt drover software.
... Ask me again later
WIMows WIIl.,k
IC}I'" the ne:xt
hmc you
plug
In
yoIIf
devlce or log on.
setup "the Machine and the Computer
• locate and install driver software (recommended)
Wll'ldowf WlIIg\.lldtyou Ulu>U9h the proc~ of =taIl'1l9 d"... ~ JOftwfle
fOfYOOldfYKe.
Windows needs to install driver software for your
series
If the Found New Hardware or Found New
Hardware Wizard screen appears:
1
Remove the USB cable connected to
your computer.
The screen may close. In this case, proceed
from
O.
2
Click Cancel to quit the screen.
3
Proceed from
O.