Reheat Function; Warm Function - NuWave Pro Plus Manual Manual

Setting Temperature
• Press the Cook Temp button.
• Press desired temperature.
• Temperature can be changed by 1ºF increments.
• Temperature ranges from 100ºF to 350ºF.
Start Cooking
Set appropriate temperature and time, then press Start to begin cooking. The remaining cooking time will appear in
the display panel, and the colon symbol between the hours and minutes will blink. The oven will automatically stop
cooking when the time has expired, and a "beep" will alert you to that fact.
Pause/Clear Cooking
To Pause the oven, press the Pause/Clear button once. The remaining cooking time will stay listed on the display
panel but the colon will not blink.
To STOP or Clear cooking time, press the Pause/Clear button twice. Cooking functions will cease immediately,
remaining time will be fully cleared, and a '0" will appear.
Delay Function
After setting your temperature and time, you can delay the program before cooking starts. When entering delay, it
will always be the first function. The delay function is only for cook time and delaying start time. Press the Delay
button. The Delay and Time functions on the LCD will blink. Input delay time and press Start. Delay stops blinking
and remains on until time expires. It is possible to delay a program for up to 9 hours and 59 minutes. If the delay
countdown reaches 0, the oven will "beep" to signal the end.

Reheat Function

The default setting is programmed at 350ºF for 4 minutes. This function is perfect for reheating single portion-sized
foods. To activate the reheat function, make sure programming is clear. The LCD display will read 0. Press the
Reheat button. This will activate the default setting. Press Start. Alarm will "beep" 3 times once time has expired.
For example, if you are warming leftover pizza, simply place the slice on the 3-inch rack, press Reheat, then Start.
If you are warming a rice or noodle dish, place a single-serving amount in an oven-safe container (glass, metal,
silicone). For softer rice or noodles, add a sprinkle of water and cover with foil.

Warm Function

After the initial cooking time is complete, you may keep foods warm. When entering warm, it will always be the
last function. The default setting is programmed at 155ºF for 2 hours. Press the Warm button. The Warm and
Time functions on the LCD will blink. 2:00 will be displayed, then press Start. To change the time, press cook
time, enter the desired time and proceed. You may program the oven to keep foods warm for up to 9 hours and
59 minutes. Once the initial cooking cycle is finished, the oven will "beep" twice before switching to the WARM
function.
CLEANING AND CARE INSTRUCTIONS
Unplug the unit before cleaning. The dome and all other parts, except the Power Head, are dishwasher safe.
Protect the metal and plastic surfaces; do not use abrasive cleaners or scouring pads. Clean after each use. The
outer surface of the Power Head can be cleaned by wiping with a damp cloth.
Owner's Manual
15