Disable Or Re-Enable (H2); Disable Zone (B1) - Panasonic EBL128 User Manual

Panasonic Eco Solutions Nordic AB
MEW01624 Rev: -
5
5.1

Disable or re-enable (H2)

Not available for users with access level / type "Information only".
Any disablement in the system is indicated by the LED
"Disablements" (L8).

Disable zone (B1)

All zones (01-99) can be individually disabled via menu B1.
Normally all alarm points within the zone will be disabled except the
addressable manual call points.

Log in with a User name and Password for typ Building officer (or
Service personnel), see page 5.
H1 Perform monthly test
Scroll (or press "2") to menu H2.
H2 Disable or re-enable

Press "A" to sub menu B1.
B1 Disable zone

Press "A".

Use the keypad to type the zone number (01-99). Press "A".
The zone can be automatically re-enabled.
If automatic re-enabling shall not be used press "A". Go to
If automatic re-enabling shall be used, press "1" and use the keypad
to set the time. Press "A".

The zone is disabled. Press "A". When required, disable more zones
or press "Return" to menu B1.

Scroll to another menu or press "Return" to menu H2. Scroll to
another menu or leave the menu system by pressing "Return".
EBL128 version 2.0.x, Daily user's manual
10

.