Indoor Installation - Haier MRV II Instruction Manual

4 Indoor installation

A. With the shortest refrigerant pipe, and convenient to connect with
distributing pipe and water pipe. Water pipe should keep a 1% gradient
at least.
B. The place for indoor unit installation should be strong enough to
afford the unit weight and running shake.
C. Preset a checking hole near the indoor unit, and there should be
enough space for maintenance, and convenient to maintain or change
the PCB and motor.
D. Ensure air return and air discharging fluent, and prevent ventilation
in short circuit , also air return duct and air outlet duct is necessary.
E. Before installation, please check if the unit appearance has been
damaged or the other abnormal after being unpacked. Also please check
if the accessories are complete, and the accessories should be
transferred to the special person for proper preservation.
F. The unit should be fixed firmly to avoid falling and shaking. After
installing the indoor unit, please check it with a gradienter to ensure the
indoor unit is horizontal.
- 8 -
Part 1