Haier MRV II Instruction Manual page 64

0010451181A（CN10 terminal of EEV 6-core red）
SW07-7 ON
SW07-8 ON
SW08-1 ON
SW08-2 ON
SW08-3 OFF
SW08-4 ON
SW08-5 ON
SW08-6 ON
SW08-7 OFF
SW08-8 ON
remark: for digital dip switch, dial to "ON" means "1", or it means "0"
connected
J9
connected
J8
connected
J24
connected
J23
disconnecte
d
J22
connected
J21
connected
J20
J19 connected
disconnecte
J18
d
J17 connected
- 65 -
change running mode that displayed
on wired controller
(J8)0(J9)0:
DEHUMIDIFY /COOL/SWING
(J8)0(J9)1: Auxiliary heat / HEAT
/DEHUMIDIFY /COOL/SWING
(J8)1(J9)0:
/COOL/SWING
(J8)1(J9)0: HEAT
/COOL/SWING
0:when unit stops, oil return, in low
speed
1: fan stops
0: in heating mode, running as med
speed in high
3-speed fan motor)
1: normal
0: in heating, thermostat Off, and
adjust valve due to the coil temp. Tc2
and ambient temp.
1.adjust according of outdoor high
pressure saturation temp.
0：Ac stepless fan motor
1：AC fan motor with three speed
standby
0: remote controlled
controlled
change phase sequence of EEV
0: reverse
1: forward
0: fixed swing
1: adjustable
Part 2
AUTO/HEAT/
DEHUMIDIFY
/DEHUMIDIFY
speed(only for
1: wired