Table of Contents
Advertisement
Cleaning the decks A and B heads
)2
To ensure playback and recording with good-quality
sound, use cotton
l—
swab to clean the heads, pinch rollers and capstans of the decks after
about every 10 hours of use.
If the diri persists, soak the swab in a little methylated
spirit or head
cleaning fluid and then clean.
&
Main unit
543
Use a soft cloth to remove dirt on the main unit.
If the dirl persists,
dip a soft cloth into a diluted solution
of neutral
1.
detergent, wring it out, wipe away the dirt, and then take up any moisture
2, 6.
with a dry cloth.
3, 7.
Do not use benzene, thinners or alcohol since they will mar the finish of the
4, 5, 8.
surfaces.
16
l—
#
87
Cotton swab
Capstan
Pinch roller
Head
Tuner section
Reception frequency:
FM: 87.5-108
MHz
MW: 522-1611
kHz (UK)
LW: 144-288
kHz (UK)
AM: 522-1710
kHz (AU)
CD player section
Type:
Changer, 3-disc
Channels:
2-channel stereo
Sampling frequency:
44.1 kHz
Pick-up:
Optical 3-beam semiconductor
laser
Laser output:
0.6 mW (Continuous
wave max.)
Wave length:
790 nm
Frequency response:
20
tiz
to 20 kHz
Wow/flutter:
Below measurable
limits
Cassette deck section
Track system:
4-track, 2-channel stereo
Frequency response:
80
Hz
to 13.5 kHz
Signal-to-noise
ratio:
45 dB
Wow/f Iutter:
0.15% (WRMS)
Fast forward/rewind
time:
Approx. 110 sec. (C-60)
Amplifier section
Output powe~
22.5 W x 2 (at 4 ohms, 10% distortion)
Sound preset:
Four electronic presets
Inputs
VIDEO IN: 400 mV/50k ohms
outputs
SPEAKERS:
4 ohms
PHONES: 8-32
ohms
Power requirements:
AC 230 V, 50
I-Iz
(UK)
AC 230-240
V, 50
HZ
(AU)
Power consumption:
74
w
Dimensions:
270(W) x 300(H) x 313(D) mm
Weight:
6.9 kg
Speaker systems
Type:
3 way bass reflex
Unit used:
Woofer: 12 cm cone type
Tweeter: piezoelectric
Super tweeter: piezoelectric
Maximum power-handling
capacity:
45 W (peak)
Nominal impedance:
4 ohms
Dimensions:
200(W) x 300(H) x 235(D) mm
Weight:
2.2 kg (per speaker)
Specifications
subject to change without notice
14
Advertisement
Table of Contents
