Table of Contents
Advertisement
To start play from the desired track
Using the remote control
1.
Select the desired disc by pressing the DISC SELECT button, then
press the
button.
2.
Press two number buttons to select the desired track.
Using the main unit
1.
Press the desired DISC button, then press the 9 button.
2,
Select the desired track by using the
-/
W or l<< /4+
button,
then press the
/11 button.
Temporarily
stopping play
Press the
/11 button. "›"
blinks on the display. To resume play, press
the button again.
Skip play
To skip to track 6 while track 3 is playing, press the
F/
N button
repeatedly until "6 appears in TR on the display.
To skip back to track 3 while track 6 is playing, press the 1+4 /<4
button
repeatedly until "3 appears.
The number buttons on the remote control can also be used for skip
play. To skip to track 6 while one track is playing, press O, then 6.
Search (forward/reverse)
If the
P/
W or K< /<<
button is pressed during play, the player will
search at high speed in the forward or reverse direction while the button
is being pressed. When the button is released, normal play will continue.
Random play
Press the RANDOM button on the remote control to begin random play.
The player will automatically
select and play discs and tracks at random.
"RANDOM" appears on the display.
Random play will not function during programmed
play.
Repeat play
Press the REPEAT button on the remote control repeatedly to select the
desired repeat mode in the following sequence, The selected repeat mode
is shown on the display.
REPEAT ONE: Repeat one track.
REPEAT ALL: Repeat all tracks on the selected disc.
REPEAT CONT: Repeat all tracks on all discs.
Released: Normal play mode
Note:
During programmed
play, "REPEAT CON7
can not be selected.
Changing discs during play
While the player is playing one disc, press one of the disc select buttons
to skip to another disc. "CH dlSC
blinks for a few seconds, then the
selected disc moves into playing position.
Play starts automatically
from the first track on the disc.
PROGRAMMED
PLAY
Up to 32 selections, from up to 3 discs, can be programmed for play in any
order.
To begin the programming
procedure, select "CD function first.
The discs or tracks must be programmed
in the stop mode.
The same disc or track can be programmed
more than once.
Follow the example below to programme tracks 6 and 2 on DISC 1 and all
tracks on DISC 3. In this example, each disc has 9 tracks and DISC 3 is
in playing position.
1.
Press the MEMORY button.
y'~
TR
q
l—l
I
—
;%
l–l
I_
l–'
1–
/
2.
3.
4.
5,
6.
7.
8.
9.
Select disc 1 by pressing the DISC 1 button.
The DISC SELECT button on the remote control can also be used.
PROG
TR
\/l\
Select track 6 by pressing the
>/
N button.
The number buttons on the remote control can also be used.
PROG
TR
Press the MEMORY button. "PROG. " remains lit
Select track 2 by pressing the K< /<<
button.
Press the MEMORY button. "PROG. " remains lit
Select disc 3 by pressing the DISC 3 button.
PROG
TR
/,.
Press the MEMORY button. "PROG." remains lit.
Press the
/11 button to start play.
PROG
TR
1~
—
ye
l—l
l—l
I
~
/:(
l_l
l_l
I
When all programmed
selections have been played, the player stops
automatically,
"O 0.00 appears on the display.
The programme
contents are retained in memory.
Any attempt to programme
more than 32 selections
will result in
"FUL~
being displayed and discontinuation
of the programming.
If a non-existent disc or track number is programmed,
that disc or track
will be skipped during play.
The programme
is cleared when the
button is pressed in the stop
mode.
Checking the programme
Each time the MEMORY
button
is pressed
in the stop mode, the
programmed
details sequentially
appear on the display.
Changing
a programme
To add a new selection to a programme:
1.
In the stop mode, press the MEMORY button repeatedly until"- - --
.- -" is displayed.
2.
Select a disc and track number as explained above.
3.
Press the MEMORY button.
To change a selection:
1.
In the stop mode, press the MEMORY
button repeatedly
until the
selection to be replaced is displayed.
2.
Select a disc and track number as explained above.
3.
Press the MEMORY button.
Note:
Programmed
details cannot be partially deleted or inserted
WHAT TO DO IF ...
If the operation of the unit or display is not normal, even though the
appropriate
buttons have been pressed.
1.
Disconnect the mains lead.
2,
Press the RESET button (rear of the unit) for 30 seconds or more.
3.
Connect the mains lead.
4.
Press the STANDBY/ON
button to turn the power on.
5.
Press the desired function button.
Note:
If the unit does not operate correctly,
please contact your nearest
SANYO Authorized
Service Centre.
9
Advertisement
Table of Contents
